Fast, Reliable Gate Parts & Welding Across Everman
Gate parts and welding in Everman, TX typically runs $180–$650 depending on whether you’re looking at hinge replacement, post reset, or custom fabrication, and most jobs are completed same-day. We stock common parts and bring welding equipment to every Everman call, so you’re not waiting on a second trip or a third-party vendor. If your gate is sagging, binding, or the opener won’t close it fully, call us at (855) 301-3214 — we’ll diagnose it on-site and fix what we can fix right then.
We’ve been working in southern Tarrant County long enough to know that Everman’s gates aren’t failing randomly. The modest ranch homes off Everman Parkway and the older blocks near Town Center were built between the 1950s and 1980s, and most still run original hardware on posts that were never set deep enough for blackland clay. James Wilson has handled this personally for 20 years. When we pull into a driveway in the 76140 ZIP code, we’re not guessing at the problem — we’re looking for the specific failure patterns this soil and this housing stock produce.
Why Horizon Gate Repair Service Texas Is Everman’s Preferred Gate Parts & Welding Company
Our Gate Parts & Welding team doesn’t subcontract out to rotating crews. James Wilson serves as lead technician on every job, which means the person quoting your repair is the same person welding your bracket or resetting your post. That matters in Everman, where a gate that binds after rain usually needs structural diagnosis before any hardware swap — and you want the same eyes on it from start to finish.
We’ve earned 638 verified customer reviews averaging 4.8 stars, and a significant share of those come from repeat calls in southern Tarrant County. Everman customers call us back because we fix the underlying issue, not just the symptom. We know that a hinge replacement on a post that’s kicked 3 inches out of plumb will fail again in six months — so we check plumb first, reset if needed, then weld and hang.
Response time to Everman is typically same-day or next-morning. We’re based in Houston but route regularly through the southern Tarrant corridor, and we carry parts for LiftMaster, FAAC, BFT, Linear, and other major brands on the truck. No waiting on Dallas distributors.
Our Gate Parts & Welding Services in Everman
Hinge Replacement
Hinge replacement in Everman runs $180–$280 for standard residential gates, but the real question is whether the hinge failed on its own or because the post shifted. In Everman’s older blocks, gate posts were commonly set in shallow, narrow concrete collars that offer almost no resistance to clay heave, so technicians routinely find the hinge post has kicked outward 2–3 inches from its original plumb line — requiring post-reset before any hardware repair will hold long-term. We don’t bolt new hinges onto tilted posts. We check plumb, reset if the collar’s failed, then weld or bolt on hardware that’ll stay aligned through the next wet-dry cycle.
Post Replacement
Post replacement in Everman typically costs $350–$650 depending on depth, concrete footer size, and whether we’re pulling an old steel post or setting new. This is the defining repair in 76140. The blackland clay swells in spring rain and shrinks in summer drought, and shallow collars can’t resist that movement. On a 1960s ranch home on Browning Drive, we found the original LiftMaster operator couldn’t close because the gate had sagged 2 inches. The shallow concrete collar had tilted in the blackland clay. We reset the post with a deeper footer, welded a new hinge bracket, and replaced the worn rollers — the gate now swings true through wet and dry seasons. That deeper footer is the difference between a 2-year fix and a 10-year fix.
Rail Repair
Bent or separated gate rails in Everman usually cost $220–$400 to repair, depending on whether we can straighten and weld or need to fabricate a replacement section. The original steel rails on 1960s–70s gates are often thin-wall tubing that’s rusted through at the weld points, especially where water pools at the bottom rail. We cut out the rot, fabricate matching stock on-site, and weld it solid. For chain-link gates common off Everman Parkway, we can splice new top rail or replace the entire frame if the mesh is still good.
Custom Welding
Custom welding for Everman gates runs $200–$500 depending on complexity — bracket fabrication, hinge rebuilds, latch modifications, or reinforcing a sagging frame. Many of the one-piece steel and wooden gates in Everman’s original housing stock have obsolete hardware that hasn’t been manufactured in decades. We measure, cut, and weld replacement brackets that match the original mounting points so you don’t have to replace a whole gate for the sake of a $40 part that no longer exists. This is where our in-house capability saves Everman homeowners from the “replace everything” push they’d get elsewhere.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
We service your brand — whether it’s a current LiftMaster system on a newer Everman home or a legacy FAAC or BFT operator that’s been running since the 1990s. We stock parts and weld on-site, which means fewer return trips and faster resolution. For Linear openers common in some of the 1970s–80s Everman subdivisions, we carry replacement gears, circuit boards, and safety sensors. If your operator is obsolete and parts are no longer manufactured, we’ll tell you straight and quote a retrofit with a modern equivalent that fits your existing gate geometry — no upsell, just facts based on what’s actually available.
Common Gate Parts & Welding Problems We See in Everman Homes
- Original 1960s–70s gate openers fail with worn gears and obsolete circuit boards. Replacement parts are no longer manufactured, forcing a full retrofit. We evaluate whether to rebuild or replace based on the gate’s condition and your budget.
- One-piece wooden or steel gates have rusted hinge brackets and sagging frames. Welding repairs fail if the post has shifted from clay heave — post resets often needed first. We check structure before we weld.
- Legacy gates on shallow-posted fences bind seasonally. North Texas’s extreme precipitation swings cause the underlying Tarrant County clay to shrink and swell dramatically, which shifts and tilts fence posts season after season; gates that latched perfectly in October will bind or sag by July without intervention.
- Chain-link gate hardware is worn past function but the frame is sound. We match old hinge and latch styles from our parts stock or fabricate equivalents, saving the frame and the cost of full replacement.
Pricing for Gate Parts & Welding in Everman, TX
| Service | Typical Range in Everman |
|---|---|
| Hinge replacement (standard) | $180 – $280 |
| Hinge replacement with post reset | $380 – $550 |
| Post replacement with deep footer | $350 – $650 |
| Rail repair / section replacement | $220 – $400 |
| Custom welding / bracket fabrication | $200 – $500 |
| Gate roller replacement (set) | $160 – $240 |
| Latch & lock replacement | $140 – $220 |
What moves you within these ranges? Post depth and soil condition are the big variables in Everman — blackland clay fights every excavation, and a post that needs 36 inches of footer costs more than one that needs 24. Material type matters too: steel tubing costs more than chain-link rail, and custom fabrication for obsolete hardware takes more time than bolting on a standard part. We give exact quotes before we start. Estimates are free. Call (855) 301-3214 and we’ll come look.
We Also Serve Cities Near Everman
We route regularly through southern Tarrant County and also handle gate parts and welding in Rendon, Kennedale, Forest Hill, and Burleson. Same trucks, same parts stock, same owner-operator standard — whether we’re working off Kennedale Parkway or in the older sections of Burleson near the county line.
Serving Everman, TX — Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Everman
Usually not, and we’ll tell you honestly after we look. Original 1960s–70s gate openers like early LiftMaster models fail due to worn gears and obsolete circuit boards; replacement parts are no longer manufactured, forcing a full retrofit. We evaluate whether your gate frame and rails are worth keeping, then quote a modern operator that fits your existing geometry. Call (855) 301-3214 for an exact assessment — estimates are free.
In Everman, it’s almost always foundation first, hardware second. North Texas’s extreme precipitation swings cause the underlying Tarrant County clay to shrink and swell dramatically, which shifts and tilts fence posts season after season; gates that latched perfectly in October will bind or sag by July without intervention. We check post plumb before we touch hinges or latches — otherwise you’re paying twice. Call (855) 301-3214 and we’ll diagnose it on-site.
Yes — custom welding is one of our core services, and we fabricate brackets for obsolete hardware regularly. We measure your existing mounting points, cut and weld matching stock on-site, and test fit before we leave. For a typical Everman one-piece steel or wooden gate, custom bracket fabrication runs $200–$350. Call (855) 301-3214 to schedule.
Yes — we service 9 major gate brands including BFT and DoorKing, and we carry common parts for both. If your operator needs a part we don’t have on the truck, we’ll source it without sending you elsewhere. For BFT hydraulic systems or DoorKing slide gate operators common in some Everman commercial installations, James Wilson has direct experience with both. Call (855) 301-3214 with your model number.
Yes — we stock standard chain-link gate latches and hinges, and if your hardware is an obsolete size or style, we can fabricate a matching latch from steel stock on-site. Typical latch replacement in Everman runs $140–$220 depending on whether we’re bolting on standard parts or welding a custom solution. Call (855) 301-3214 for an exact quote — estimates are free.
Ready to get your gate working right? James Wilson handles every job personally, with 20 years in the trade and the parts and welding equipment to fix it in one visit when possible. Whether you’re off Everman Parkway, near Town Center, or on one of the older blocks where the clay’s been fighting your gate for decades, we’ll diagnose it honestly and quote it upfront. Call (855) 301-3214 for your free estimate.
Written by James Wilson, Owner at Horizon Gate Repair Service Texas, serving Everman and southern Tarrant County since 2004.