Fast, Reliable Gate Parts & Welding Across Burleson
Gate parts and welding repair in Burleson typically runs $180–$650 depending on whether we’re replacing hinges on a cedar privacy gate or welding structural repairs on a heavy pipe gate, and most jobs are completed same-day. We carry common parts for LiftMaster, FAAC, BFT, and Linear systems, plus our mobile welding rig, so Burleson property owners aren’t waiting on third-party vendors.
We’ve been driving out to Burleson from our Houston base for years, and we know the territory well — from the master-planned subdivisions along the I-35W corridor to the acreage properties out past County Road 605. James Wilson handles these calls personally, with 20 years in the trade and the welding equipment on his truck to fix structural failures on the spot. Whether you’ve got an ornamental iron gate dragging across your driveway apron in Shadow Creek or a 16-foot tubular steel pipe gate that’s overloaded its opener out on the rural fringe, we aim to resolve it in one trip. Call (855) 301-3214 for a free estimate.
Why Horizon Gate Repair Service Texas Is Burleson’s Preferred Gate Parts & Welding Company
Our Gate Parts & Welding team has built a reputation in Burleson by showing up prepared and finishing the job without callbacks. James Wilson has handled gate repairs personally for 20 years, and that matters when you’re dealing with the specific failures this area produces — heaved posts in HOA subdivisions, overloaded openers on rural pipe gates, hinge fatigue from clay soil stress cycles.
We’ve earned 638 verified customer reviews averaging 4.8 stars, and that volume reflects something simple: we stock parts and weld on-site, so Burleson customers aren’t left waiting while we order components or subcontract fabrication. Our response time to the 76028 and 76097 ZIP codes is typically same-day or next-day, and we know the local conditions — the Blackland Prairie clay, the 2000s-era subdivision buildout, the heavier agricultural gates on the west side — that determine how a repair needs to be done.
One call covers it. James Wilson arrives with parts inventory and welding capability, diagnoses the root cause, and fixes it. No rotating crews, no “we’ll come back next week with the right bracket.”
Our Gate Parts & Welding Services in Burleson
Hinge Replacement
Bottom hinges on Burleson gates take a beating. The drought-to-deluge cycle in North Texas causes the Blackland Prairie clay to crack away from posts during dry summers, then swell and heave them sideways during wet winters — repeated stress that snaps hinges and throws alignment off. We see this constantly in cedar privacy fence swing gates throughout 76028, where the hinge pin shears or the mounting plate tears loose from the post. We stock heavy-duty ball-bearing hinges and weld-on hinge brackets rated for the actual load, not the undersized hardware that came with the original install. A typical hinge replacement in Burleson runs $180–$320.
Post Replacement & Re-Plumbing
This is where Burleson’s geology becomes unavoidable. The expansive shrink-swell clay beneath the I-35W corridor subdivisions heaves concrete post footings seasonally, tilting ornamental iron gates until they’re dragging across driveway aprons or binding against latches. In Shadow Creek and similar HOA communities, we’re back every 12–18 months re-plumbing posts that have migrated an inch or two — it’s chronic, it’s predictable, and it demands a specific repair approach. We excavate to below the active clay layer where possible, set posts in concrete with proper drainage, and weld reinforced post caps and hinge plates that can withstand the next cycle. Post replacement or re-plumbing in Burleson typically costs $350–$650 depending on depth, concrete work, and whether we’re resetting an existing gate or fabricating new mounting hardware.
Rail Repair & Gate Roller Service
Sliding gates on Burleson commercial properties and larger residential estates depend on level track and functional rollers. When clay heave throws the rail out of alignment, rollers bind, flat-spot, or fracture — and the gate motor strains and eventually fails. We straighten or replace track sections, weld new rail supports where the original mounts have fatigued, and install sealed-bearing rollers rated for the gate weight. For properties along Burleson’s rural western edge with longer service drives, we often see track installations that were never engineered for the actual gate mass; we correct that. Rail and roller repairs in Burleson generally fall between $280–$480.
Custom Welding & Fabrication
Our mobile welding rig is the difference between a one-trip fix and a two-week delay. We recently repaired a chronic hinge failure on a heavy tubular steel pipe gate at an acreage property off County Road 605. The 12-foot gate was sagging because its LiftMaster opener arm had snapped under the weight of the oversized door. We replaced the hinges and welded a reinforced bracket, ensuring one-trip completion. That kind of structural repair — welding cracked gate frames, fabricating custom hinge mounts, reinforcing overloaded opener arms — is standard work for us. Custom welding and fabrication in Burleson starts around $250 for simple repairs and ranges to $600+ for extensive structural work.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burleson
We service your brand — and we mean it. James Wilson is certified familiar with nine major gate manufacturers, and for Burleson customers we regularly stock and install parts for LiftMaster, FAAC, BFT, and Linear systems. That includes opener arms, control boards, safety loops, and accessory hardware. Because we carry inventory rather than ordering per job, a Burleson property owner with a failed FAAC control board or a snapped Linear actuator isn’t waiting on shipping. We diagnose, pull the part, and install. Fast turnaround matters when your gate is your property’s primary security point.
Common Gate Parts & Welding Problems We See in Burleson Homes
- Shrink-swell clay tilts post footings, causing gates to bind or scrape concrete driveways within 2–3 years. The graded clay pad sites beneath newer Burleson subdivisions make this almost inevitable — we address it with deeper footings, welded reinforcement, and realistic expectations about ongoing maintenance.
- Oversized pipe gates on rural properties overload standard openers like LiftMaster, leading to arm and gear failures. A 16-foot tubular steel gate built for livestock containment can weigh 400+ pounds; the residential-grade opener spec’d by a general contractor often isn’t rated for that load. We weld reinforced mounting brackets and specify appropriately rated equipment.
- Repeated stress from drought-to-deluge cycles snaps bottom hinges on cedar privacy fence swing gates. The 2022–2023 drought was especially destructive to post footings across Burleson, and we’re still seeing the hinge failures that resulted. We upgrade to weld-on, greaseable hinge systems that outlast standard screw-on hardware.
- HOA-specified ornamental iron gates in communities like Shadow Creek develop chronic alignment issues from clay heave. The near-annual re-plumbing cycle is a known condition in these subdivisions; we perform efficient, minimally invasive post resets that preserve the gate and reduce long-term cost.
Pricing for Gate Parts & Welding in Burleson, TX
Here’s what we’ve actually charged for gate parts and welding work in the Burleson market:
| Service | Typical Range in Burleson |
|---|---|
| Hinge replacement (standard) | $180 – $320 |
| Hinge replacement (heavy-duty/welded) | $280 – $420 |
| Post re-plumbing/reset | $350 – $550 |
| Post replacement with concrete footing | $450 – $650 |
| Rail repair and roller replacement | $280 – $480 |
| Custom welding / bracket fabrication | $250 – $600+ |
| Emergency same-day service call | $150 – $200 base + parts |
What moves the needle: gate material (ornamental iron vs. heavy pipe steel), access conditions (buried utilities, tight setbacks), and whether we’re correcting a previous repair that failed prematurely. We don’t quote blind over the phone — we diagnose on-site, explain what we’re seeing, and give you the exact number before any work starts. Estimates are free. Call (855) 301-3214 to schedule.
We Also Serve Cities Near Burleson
We regularly run gate parts and welding calls throughout southern Tarrant and northern Johnson counties. If you’re in Everman, Rendon, Kennedale, or Mansfield, the same response times and on-site welding capability apply — James Wilson covers this whole corridor personally. Rural properties with heavy pipe gates, HOA subdivisions with ornamental iron, commercial access control systems: one call covers it.
Serving Burleson, TX — Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Burleson
Your posts are sitting on Burleson’s Blackland Prairie clay, some of the most expansive shrink-swell soil in North Texas. The graded clay pad sites beneath I-35W corridor subdivisions like Shadow Creek heave and contract seasonally, tilting concrete footings and the posts set in them. This is a chronic geological condition, not a construction defect — we address it with deeper footings, welded post reinforcement, and realistic maintenance expectations rather than pretending a standard post set will hold forever. Call (855) 301-3214 for a free assessment of your specific gate.
Yes, if the post itself is structurally sound and properly set. We cut away the failed hinge, weld a heavy-duty replacement bracket directly to the post, and reinforce with gusset plates if the gate weight demands it. For the 12-foot tubular steel gates common on Burleson’s rural properties, we spec greaseable, high-load hinges rated for the actual door mass — not the hardware that came with the gate. Most hinge repairs with custom welding run $280–$420 in Burleson.
A 16-foot tubular steel pipe gate can exceed 400 pounds, which overwhelms most residential-grade openers. We typically spec commercial-duty Linear or FAAC swing gate operators with higher torque ratings and welded reinforced mounting brackets — the same setup we installed on the County Road 605 property where a LiftMaster arm had snapped under load. The right opener depends on gate weight, wind exposure, and cycle frequency; we measure and spec on-site. Call (855) 301-3214 for an exact recommendation and quote.
In the most active clay zones along the I-35W corridor, ornamental iron gate posts in HOA subdivisions typically need re-plumbing every 12–24 months. Rural properties with deeper footings or less expansive native soil may go 3–5 years. The 2022–2023 drought accelerated movement across 76028 by desiccating soil and creating shrinkage cracks that destabilized footings. We can’t change the geology, but we can build repairs that minimize disruption and cost over time.
Yes — James Wilson is certified familiar with BFT systems, and we stock common BFT control boards, limit switches, and actuator hardware. Burleson properties with BFT openers don’t need a referral to a distant dealer; we diagnose, source parts from our inventory, and repair on the same visit in most cases. For BFT-specific repairs in 76028 or 76097, call (855) 301-3214 and we’ll confirm parts availability for your model.
Written by James Wilson, Owner at Horizon Gate Repair Service Texas, serving Burleson and the Houston metro area since 2004.