Fast, Reliable Gate Repair Across Converse
Gate repair in Converse typically runs $180–$650 depending on whether you’re looking at hinge replacement, post reset, or full realignment, and most jobs in the 78109 ZIP code are completed same-day. We’re Horizon Gate Repair Service Texas, and our Gate Repair team knows Converse’s gates inside and out — from the 1980s tract homes off Gibbs Sprawl Road to the rental properties cycling through JBSA-Randolph families near FM 1518. James Wilson has handled this personally for 20 years, and we carry parts for LiftMaster, Linear, Viking, and Ghost Controls systems so we don’t waste your afternoon running back to Houston. Call (855) 301-3214 for a free estimate.
Why Horizon Gate Repair Service Texas Is Converse’s Preferred Gate Repair Company
We’ve been driving to Converse long enough to know which subdivisions were built in which wave — the 1980s builds near Kitty Hawk Middle School, the 1990s expansion toward Live Oak, the 2000s infill closer to Loop 1604. That history matters because those decades correspond directly to which gates are failing now, and why.
Our 638 verified customer reviews averaging 4.8 stars include plenty from Converse homeowners and property managers who’ve watched us reset posts that other companies wanted to replace entirely. James Wilson serves as lead technician on every job — you get the same person who diagnosed it, not a rotating subcontractor who needs directions to your neighborhood.
Response time to Converse is typically same-day or next-morning from our Houston base. We stock galvanized hinges, post anchors, and welding equipment on every truck, so when clay soil has heaved your post three inches out of plumb — the most common call we get from Converse — we fix it in one visit.
Our Gate Repair Services in Converse
Post Repair
Post repair in Converse runs $280–$480 because it’s rarely just the post. Converse sits atop Blackland Prairie expansive clay soils that swell and contract dramatically with South Texas wet-dry cycles, causing gate posts to heave, lean, or sink seasonally. We’ve reset posts on west-facing properties off FM 1518 that had shifted so far the gate wouldn’t close at all — the clay had pushed the post three inches, then baked it there through a hundred-degree summer. We excavate, set new concrete below the active soil layer, and use galvanized hardware that won’t corrode in that same cycle.
Gate Realignment
Gate realignment in Converse costs $180–$320 and is often bundled with post work. The seasonal clay-soil movement creates a compounding problem: a single wet spring followed by a dry summer can shift a gate post enough to bind the frame completely, and each year the misalignment gets worse. On a rental property near the intersection of Gibbs Sprawl Road and FM 1518, we found a 1990s wood privacy gate with a stuck LiftMaster opener that the tenant had ignored for two seasons. The post had heaved 3 inches out of plumb from clay soil movement, warping the frame so badly a simple hinge swap would have been useless. We reset the post, replaced the rusted hinges with heavy-duty galvanized units, and reprogrammed the opener — the gate has cycled smoothly since.
Hinge Repair
Hinge replacement in Converse typically runs $140–$260 per gate. The local housing stock — 1980s–2000s suburban tract homes built quickly as affordable housing for San Antonio workers and JBSA-Randolph military families — came with builder-grade hinges and latches rated for maybe 10–12 years. Most are now well past that threshold across entire subdivisions. Add Converse’s intense UV and 100°F+ summer afternoons, and those hinges seize, sag, or pull completely free of rotted jambs. We use heavy-duty galvanized hinges with longer screws that bite into solid framing, not just the deteriorated wood surface.
Weld Repair
Weld repair for metal gates and frames runs $200–$400 in Converse. We weld on-site — no waiting for a third-party fabricator. This matters for wrought-iron and aluminum gates where clay-soil movement has stressed welds to cracking, or where rust has compromised joints at the base of pickets.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Converse
We service your brand — whether that’s a LiftMaster swing-gate opener on a 1990s wood frame near Kitty Hawk, a Linear slide-gate system at a commercial property off Loop 1604, or a Viking or Ghost Controls unit on a newer install in the Live Oak border area. We stock local parts for Converse customers, which means fast turnaround when your opener fails or your access control board needs replacement. James Wilson has diagnosed and repaired every generation of these systems over 20 years, so when a tenant calls saying “the gate just stopped working,” we know which failure mode to check first.
Common Gate Repair Problems We See in Converse Homes
- Post heave from clay soil expansion. After wet springs, Blackland Prairie soils swell and push posts off-plumb; dry summer contraction leaves voids that let them sink or tilt further. By August, gates that closed in March are binding or won’t latch at all.
- Wood rot and warping on west- and southwest-facing gates. These take the full brunt of afternoon heat, baking the wood while the same post has already been pushed off plumb by clay underneath. It’s a one-two combination that’s predictable enough that experienced local operators quote a post-reset as a near-automatic line item.
- Zero-maintenance rental turnover. Gates at JBSA-Randolph rental properties are neglected by successive tenants, arriving with severely racked frames, seized openers, and hardware that’s been loose so long the screw holes are stripped out.
- Builder-grade hardware past service life. Original hinges and latches from 1980s–2000s tract construction were never meant to last 30+ years. We’ve replaced them by the dozen in subdivisions where every third house has the same sagging gate.
Pricing for Gate Repair in Converse, TX
| Service | Typical Range in Converse |
|---|---|
| Hinge repair / replacement | $140 – $260 |
| Gate realignment | $180 – $320 |
| Post repair / reset | $280 – $480 |
| Weld repair (metal gates) | $200 – $400 |
| Lock / latch replacement | $120 – $220 |
| Rust treatment + hardware | $160 – $300 |
What moves you within these ranges? Post depth needed to get below Converse’s active clay layer. Whether the frame itself has warped beyond saving. If the opener needs reprogramming or replacement after being strained by a binding gate for months. We always inspect first and quote upfront — estimates are free, and we don’t start work until you know the exact number. Call (855) 301-3214 to schedule.
We Also Serve Cities Near Converse
We regularly run from Converse to neighboring communities — Windcrest with its established residential gates, Universal City near the airport corridor, Kirby for its mix of older and newer housing stock, and Live Oak where the clay-soil problems are nearly identical to Converse’s. Same-day response, same stocked trucks, same James Wilson on the job.
Serving Converse, TX — Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Repair in Converse
Expansive Blackland Prairie clay soils beneath Converse swell when wet and shrink when dry, exerting tremendous pressure on posts set in that active layer. We reset posts with deeper concrete footings that extend below the zone of seasonal movement, typically solving the problem permanently for $280–$480. Call (855) 301-3214 and we’ll check your post depth — estimates are free.
West- and southwest-facing gates in Converse take the worst combination of afternoon UV baking and clay-soil heave, so we almost always find both frame warping and post tilting together. We assess whether the wood frame can be straightened and re-secured, or if replacement is more cost-effective; realignment plus hinge upgrade typically runs $180–$320, while full frame rebuild starts around $450. Call (855) 301-3214 for an exact quote.
Yes — we specialize in the severely racked frames common at JBSA-Randolph rental properties in Converse, where successive tenants ignore maintenance until the gate barely functions. We straighten or replace the frame, reset posts, upgrade hardware, and reprogram openers; most rental-turnover repairs run $350–$650 depending on how far the neglect has gone. Call (855) 301-3214 — we work directly with property managers and owners.
Yes, and we stock parts for LiftMaster systems commonly found on Converse’s 1990s-era gates. Older openers often fail because they’ve been straining against misaligned gates for years; we fix the mechanical problem first, then diagnose whether the opener needs repair ($120–$240) or replacement ($450–$850). Call (855) 301-3214 to schedule.
Repair is usually more economical for Converse’s 1980s–1990s wood privacy gates if the posts are still sound and the frame isn’t rotted through — typical repair runs $300–$600 versus $1,200–$2,500 for full replacement. However, if multiple posts are failing, the frame is warped beyond straightening, or you’re on your third hinge replacement, replacement becomes the smarter long-term investment. We’ll give you an honest assessment either way — call (855) 301-3214 for a free evaluation.
Ready to fix your gate? Call (855) 301-3214 for a free estimate in Converse. Same-day service available.
Written by James Wilson, Owner at Horizon Gate Repair Service Texas, serving Converse and the greater San Antonio area since 2004.