Fast, Reliable Gate Parts & Welding Across Fort Worth
Gate parts and welding repair in Fort Worth typically runs $180–$650 depending on whether you’re dealing with a simple hinge swap or a full post reset with custom fabrication. Most hinge and latch jobs we handle in Fort Worth are completed same-day, while post replacement with welding usually takes one to two days once materials are confirmed. Call (855) 301-3214 for a free estimate — we’ll look at your gate and give you an honest repair-versus-replace recommendation.
We’ve been driving to Fort Worth from our Houston base for years, and we know the difference between a gate that needs a quick weld and one that’s fighting Fort Worth Prairie clay the whole way. From the 1950s ranch homes off Camp Bowie Boulevard to the newer HOA communities along Chisholm Trail Parkway, we’ve welded braces, replaced posts, and sourced hardware for gates that take a beating from Texas wind and soil. Our Gate Parts & Welding team carries the fittings and steel stock to fix most problems without ordering parts and coming back.
Why Horizon Gate Repair Service Texas Is Fort Worth’s Preferred Gate Parts & Welding Company
James Wilson has handled gate repairs personally for 20 years, and that matters in Fort Worth because the gates here aren’t generic. The west side’s ornamental iron on native limestone columns, the working ranch gates in 76108, the HOA-mandated automated entries near Alliance — each configuration needs different hardware, different welding approaches, and different troubleshooting. You get James on your job, not a rotating subcontractor who’s seeing your gate type for the first time.
Our 638 verified customer reviews average 4.8 stars, and that includes plenty of Fort Worth-area homeowners who found us after other technicians couldn’t service their brand or didn’t recognize the soil-shift problem. We stock parts and weld on-site, which means fewer visits and faster resolution. We’re familiar with the Tarrant County permit requirements for automated gates and the UL 325 safety standards that Fort Worth’s newer subdivisions enforce. One call covers it — repair, welding, parts, and operator service.
Our Gate Parts & Welding Services in Fort Worth
Hinge Replacement
Fort Worth’s sustained plains winds put relentless lateral stress on wide ranch-style gates, and we’ve replaced more worn hinges here than in Dallas or Arlington combined. A typical hinge replacement on a residential iron gate in Fort Worth runs $180–$320, including heavy-duty ball-bearing or greaseable hinges rated for the gate’s actual weight. On older 76107–76109 homes with original ornamental iron, we often find hinges that were never meant to handle the gate’s span — we upgrade to proper capacity and weld reinforcement plates when the post steel is thin.
Post Replacement
This is the big one in Fort Worth. The Fort Worth Prairie’s expansive Blackland-type clay swells several inches after heavy rain, then cracks open during summer droughts. That cycle heaves gate posts out of plumb every few years, no matter how well they were originally set. We’ve replaced posts in Mistletoe Heights, Berkeley Place, and throughout the 76108 corridor where the soil movement is most aggressive. Post replacement with proper concrete footing and welded hardware in Fort Worth typically costs $450–$850. We set posts deeper than standard and use welded base plates or diagonal bracing where the soil demands it — techniques we’ve refined specifically for Fort Worth conditions.
Rail Repair
Bent or broken rails on wrought-iron gates are common where vehicles have made contact or where gate sag has transferred stress to the frame. We straighten light bends in the field and cut out cracked sections for welded replacement. Rail repair in Fort Worth generally falls between $220–$480 depending on rail count and whether we’re matching existing scrollwork or picket patterns. On historic west-side gates, we preserve original profiles rather than replacing whole sections unnecessarily.
Custom Welding
Our on-site welding capability is what separates us from gate companies that farm out fabrication and make you wait two weeks. James Wilson welds custom braces, latch mechanisms, and reinforcement gussets right at your Fort Worth property. We recently worked on a sagging wrought-iron driveway gate in the 76108 corridor near the Chisholm Trail Parkway, where a homeowner’s aging FAAC operator was struggling with a misaligned hinge post. The post had shifted due to expansive clay soil heave, and we welded a custom brace to realign the gate and replaced the worn latch, avoiding a full post replacement. Custom welding and fabrication in Fort Worth ranges from $280 for simple brace work to $650 for complex gate frame reconstruction.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Worth
We service your brand — and we mean it. Our familiarity with LiftMaster, FAAC, BFT, and Linear operators means we can troubleshoot electromechanical failures on automated Fort Worth gates without referring you elsewhere. We stock common parts for these systems and can source proprietary hardware faster than dealers who only handle one line. That matters when your FAAC 746 is straining against a misaligned post or your LiftMaster LA500 is throwing fault codes because the gate’s binding. We fix the mechanical problem and the operator, not one or the other.
Common Gate Parts & Welding Problems We See in Fort Worth Homes
- Gate sag from clay-soil post movement. The Fort Worth Prairie’s expansive clay heaves posts out of plumb every few years, especially on ranch-style homes with masonry columns where mortar joints crack and destabilize the hinge attachment. We see this constantly in 76107, 76108, and 76109 — it’s the dominant repair call here.
- Worn hinges and latches on heavy wrought-iron gates. Fort Worth’s stronger, more sustained plains winds accelerate mechanical wear on wide ranch gates in a way Dallas’s more sheltered terrain doesn’t. Hinge pins wallow out. Latch bolts don’t catch. We replace with heavier hardware and weld reinforcement where needed.
- Electromechanical failures from stressed operators. Aging LiftMaster and FAAC units on out-of-plumb gates work overtime, burning out motors and control boards. We realign the gate mechanically first, then service or replace the operator — fixing only the operator leaves you with the same failure in six months.
- Livestock panel and arena gate issues in 76108 and western Fort Worth. A significant number of parcels here retain active horse and small-livestock zoning inside city limits. We regularly service working livestock panel gates, sliding arena gates, and cattle-gap-adjacent entries alongside standard residential work — a combination nearly unique among major Texas cities that requires familiarity with heavy tubular-steel ranch hardware, not just residential ornamental iron.
Pricing for Gate Parts & Welding in Fort Worth, TX
| Service | Typical Range in Fort Worth |
|---|---|
| Hinge replacement (residential iron gate) | $180 – $320 |
| Latch and lock replacement | $140 – $260 |
| Rail repair (per section) | $220 – $480 |
| Custom welding / brace fabrication | $280 – $650 |
| Post replacement with footing | $450 – $850 |
| Gate roller replacement (sliding gates) | $200 – $380 |
What moves you within these ranges? Gate material and weight, access to the post or hinge, whether we can weld on-site or need to pull the gate, and soil conditions for post work. Fort Worth’s clay soil often means we need to excavate deeper and use more concrete than in sandy-soil regions — that’s reflected in our post replacement pricing. We don’t quote blind. Call (855) 301-3214 for a free estimate — we’ll look at your gate, explain what’s actually wrong, and give you a firm number before any work starts.
We Also Serve Cities Near Fort Worth
Our service radius covers the full Fort Worth metro and surrounding communities. We regularly handle gate parts and welding calls in Haltom City, where older residential gates share similar clay-soil challenges, plus River Oaks, Forest Hill, and Saginaw. If you’re in one of these areas and your gate is sagging, binding, or needs welded repair, the same response standards and pricing structure apply.
Serving Fort Worth, TX — Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Fort Worth
Fort Worth sits on the Fort Worth Prairie’s expansive Blackland-type clay, which swells when wet and shrinks dramatically during droughts. That seasonal movement exerts thousands of pounds of force on buried posts, cracking mortar joints on masonry columns and tilting steel posts regardless of original installation quality. We address this by setting replacement posts deeper than standard, using welded base plates or diagonal bracing, and sometimes recommending periodic adjustment rather than full replacement if the movement is predictable. Call (855) 301-3214 and we’ll assess whether your post can be braced or needs full replacement.
Yes — often we can, and it’s usually worth trying on Fort Worth’s older west-side gates. Original wrought iron from the 1950s–1970s is typically heavier gauge than modern imports, and the scrollwork or picket profiles may be irreplaceable. We weld cracks, fabricate matching hardware when originals are obsolete, and upgrade hinges and latches to modern capacity while preserving the gate’s character. Replacement runs $2,500–$6,000+ for comparable ornamental iron; repair and welding typically costs $400–$1,200. Call (855) 301-3214 for an evaluation — we’ll tell you honestly if your gate is a candidate.
Absolutely. In Fort Worth’s 76108 zip code and western areas with active horse and small-livestock zoning, we regularly service heavy tubular-steel ranch gates, sliding arena gates, and livestock panel entries alongside standard residential work. These gates require different hardware — heavier hinges, different latch systems, often wheel supports — and we’re equipped to weld repairs and source ranch-grade fittings. Most livestock gate repairs in Fort Worth run $250–$550. Call (855) 301-3214 to describe your setup and get a targeted estimate.
Yes. Fort Worth’s newer master-planned subdivisions, especially along Chisholm Trail Parkway and the Alliance corridor, require automated gates to meet UL 325 safety standards under Tarrant County permit requirements. We install and repair photo eyes, edge sensors, and safety loops; verify entrapment protection on LiftMaster, FAAC, BFT, and Linear operators; and document compliance for HOA or county inspection. Safety retrofit work typically costs $180–$420 depending on existing equipment. Call (855) 301-3214 to schedule a compliance check.
Repair is usually better if the frame is structurally sound and the gate has historical or custom character that’s costly to replicate — common with Fort Worth’s older ornamental iron. Replace when the frame is extensively rusted, multiple rails are failing, or repair costs exceed 60% of replacement. For a typical residential iron gate in Fort Worth, welding and parts repair runs $350–$1,200; comparable replacement with new operator starts around $3,500. We’ll give you both numbers honestly. Call (855) 301-3214 for a free repair-versus-replace assessment.
Written by James Wilson, Owner at Horizon Gate Repair Service Texas, serving Fort Worth with hands-on gate parts and welding expertise since 2004.