Ghost Controls Gate Repair in Irving, TX | Horizon Gate Repair Service Texas
Ghost Controls gate repair in Irving typically runs $180–$450 depending on whether you’re dealing with a board replacement, motor rebuild, or full realignment after clay soil shift. We’re an independent service provider — not manufacturer-authorized — and we carry OEM Ghost Controls parts plus compatible batteries for faster turnaround across Irving’s 75060–75063 ZIP codes. Call (855) 301-3214 for a free estimate, usually same-day.
Why Irving Residents Choose Us for Ghost Controls Service
We’ve been fixing gates in Irving long enough to know that a technician who understands your brand saves you a second visit. James Wilson has handled Ghost Controls systems personally for 20 years — from the early TSS1 solar swing operators to the DTC timer controllers — and he still runs the service calls himself most days. That’s not a marketing line; it’s how we avoid the “we’ll have to order that and come back” problem that frustrates HOA managers in Las Colinas and homeowners in South Irving alike.
Our shop stocks Ghost Controls OEM control boards, limit switches, and motors, plus quality aftermarket AGM batteries for solar models when OEM supply runs thin. We weld on-site, re-plumb posts, and reset concrete footings — so when Irving’s black clay shifts your gate two inches by September, we fix the structure and the operator in one trip. 638 customers and counting, averaging 4.8 stars. One call covers it.
Common Ghost Controls Gate Repair Problems We Solve in Irving
- Motor board failure from power surges. Aging electrical infrastructure in Las Colinas HOA systems — much of it installed during the 1990s buildout — delivers inconsistent voltage and frequent lightning-induced spikes. We’ve replaced dozens of Ghost Controls boards in this area, and we always test the incoming power before installing new hardware so the replacement doesn’t fry next storm.
- Battery drain on TSS1 and SSS1 solar models. Irving’s mature tree canopy in neighborhoods like Valley Ranch and parts of Las Colinas blocks panels for days during spring storms. We recently serviced a Las Colinas HOA on North MacArthur Boulevard where a Ghost Controls TSS1 solar operator on a community swing gate had stopped working. The control board had been fried by a lightning surge, and the battery was dead from two weeks of overcast spring weather. We replaced the board with an OEM Ghost Controls unit, installed a new AGM battery, and realigned the gate — the HOA hadn’t had a working gate in three weeks.
- Limit switch drift from post movement. Irving’s expansive black clay swells in wet springs, then shrinks and cracks through 100°F summers. That heave-and-settle cycle shifts gate posts, throws off limit switch calibration, and leaves Ghost Controls operators hunting for open and close positions. We re-plumb posts and recalibrate switches — usually catching hinge stress before it snaps.
- Remote transmitter desynchronization after binding. When soil movement drags a gate frame out of square, the Ghost Controls operator works harder on every cycle. Repeated binding confuses the control logic and eventually desyncs remotes. We fix the alignment first, then reprogram — not the other way around.
- Structural fatigue on 1990s-era installations. Many Las Colinas community gates were built with brick pillars and heavy wrought-iron frames that have settled unevenly for decades. The Ghost Controls operator is often the last healthy component; we repair posts, weld cracked hinge plates, and remount operators to plumb surfaces.
Ghost Controls Service in Irving: What Local Conditions Mean for Your Equipment
Irving’s Las Colinas district, built on expansive black clay, sees seasonal gate post movement up to 2 inches, requiring re-plumbing of Ghost Controls operators every 2-3 years — a frequency that is unique to this area even within DFW. We’ve worked on Las Colinas HOA gates where the original 1990s Viking or Linear operators were replaced with Ghost Controls TSS1 units during a 2010s upgrade cycle, and now those installations are hitting their own maintenance window. The clay doesn’t care what brand is mounted to the post.
This means our Ghost Controls calls in Irving follow a different pattern than in Plano or North Richland Hills. In those cities, we might swap a failed board and leave. In Irving, especially along MacArthur Boulevard and through the gated sections of Las Colinas, we expect to realign, re-plumb, or weld — and we bring the equipment to do it. A gate that works right isn’t a luxury — it’s just what I said I’d deliver.
Ghost Controls Models & Products We Service in Irving
We work on the full Ghost Controls residential and light-commercial line: TSS1 single solar swing operators, SSS1 dual solar systems, and the DTC series timer controllers. For control board replacements, we source genuine Ghost Controls OEM units — we’ve seen too many generic boards fail within a season on Texas heat and surge-prone power. For solar batteries, we stock quality aftermarket AGM options that match OEM spec when factory supply lags, saving Irving customers a two-week wait during peak spring repair season. Motor rebuilds, limit switch replacements, and remote programming all happen with parts on our truck.
Ghost Controls Service Pricing in Irving
| Service | Typical Range in Irving |
|---|---|
| Diagnostic & basic adjustment | $180 – $250 |
| Control board replacement (OEM) | $280 – $450 |
| Solar battery replacement (aftermarket AGM) | $180 – $320 |
| Motor repair or replacement | $320 – $550 |
| Gate realignment & post re-plumbing | $350 – $650 |
| Full operator upgrade (existing gate) | $850 – $1,400 |
What drives cost: whether the issue is electrical, mechanical, or structural; whether OEM parts are in stock; and whether clay soil shift has compromised the post footing. Our free estimate includes full diagnostic, written quote, and timeline — no obligation. Call (855) 301-3214 for exact pricing on your Ghost Controls system.
Serving Irving, TX — Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Ghost Controls Gate Repair in Irving
Expansive black clay soil swells when wet and shrinks in summer heat, shifting your gate posts and throwing off operator calibration. In Irving’s Las Colinas and South Irving neighborhoods, we see this every season — it’s not your installation, it’s the geology. We re-plumb posts and recalibrate limit switches together so the fix lasts. Call (855) 301-3214 and we’ll assess whether your footings need resetting too.
No — HOA community gates require board or property manager authorization before we touch equipment. We’re familiar with Las Colinas HOA spec sheets and work directly with community managers, but we won’t start without proper approval. If you’re a homeowner in an HOA-governed community, contact your board first; we’re happy to speak with them about scope and timeline.
Check whether the solar panel is clean and unshaded — Irving’s mature oaks and spring cloud cover are common culprits. If the panel’s clear and the battery still won’t hold charge after 48 hours of sun, the battery’s likely sulfated or the charge controller has failed. We stock replacement AGM batteries and can test the charging circuit on-site. Call (855) 301-3214 — we’ll bring the parts.
Yes. Many early Ghost Controls units and the 1990s-era operators they replaced in Las Colinas are now obsolete. We evaluate your gate frame, post condition, and usage needs, then spec a current Ghost Controls model or cross-compatible alternative that fits without rebuilding the pillar. Upgrades typically run $850–$1,400 installed. Call (855) 301-3214 for a free assessment.
Every 12–18 months for standard residential gates; every 6–12 months for Las Colinas HOA community gates with high daily cycle counts. Given Irving’s clay soil movement, we check post plumb, hinge wear, and limit switch drift at every service — catching alignment issues before they burn out the motor. Call (855) 301-3214 to schedule; we offer same-day availability for urgent issues.
Service Areas Near Irving
We run Ghost Controls service calls throughout Irving’s 75060, 75061, 75062, and 75063 ZIP codes, with regular routes to Dallas (Oak Cliff, where James grew up), Plano, North Richland Hills, Highland Park, and Manor. Las Colinas HOA contracts and South Irving ranch-home gates keep us in this area weekly.
Book Your Ghost Controls Service in Irving Today
James Wilson still runs the service calls himself — 20 years in the trade, 638 verified reviews, and zero patience for “we’ll come back next week.” If your Ghost Controls gate is binding, dead, or desynchronized, call (855) 301-3214. We stock parts, weld on-site, and typically diagnose same-day across Irving.
Written by James Wilson, Owner at Horizon Gate Repair Service Texas, serving Irving since 2004.