Ghost Controls Gate Repair in Houston, TX

We provide independent Ghost Controls gate repair across Houston, with same-day service on most calls and OEM-compatible parts stocked for TSS, SSS, and HBS series openers. The one thing that makes our Ghost Controls work here different: we’ve spent twenty years watching Houston’s gumbo clay soil heave, tilt, and crack gate posts on a seasonal cycle you simply don’t see in Austin or San Antonio — and we know exactly how to realign a Ghost Controls system so it stops stripping gears and burning out boards. Call (855) 301-3214 for a free estimate.

Call (855) 301-3214

Why Houston Residents Choose Us for Ghost Controls Service

James Wilson has handled gate repairs personally for 20 years, and Ghost Controls has been in our rotation since the brand first gained traction in Texas master-planned communities. We’re not a Ghost Controls dealer — we’re independent technicians who’ve repaired over 200 Ghost Controls gates in Houston alone, from the Enclave at Cinco Ranch to post-Harvey rebuilds in Bellaire.

That independence matters. We service nine major brands — LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule — so we’re not pushing you toward a new system sale when your existing opener just needs a board replacement and a post reset. We stock parts and weld on-site, which means most Houston customers see their gate working again in a single visit, not two or three.

James picked up his foundational metalwork and hydraulics training at Eastfield College in Mesquite, where an instructor told him there’d always be work for someone who could make a gate open and close reliably. Twenty years and 638 customer reviews later — averaging 4.8 stars — that prediction’s held up. A gate that works right isn’t a luxury — it’s just what we said we’d deliver.

Common Ghost Controls Gate Repair Problems We Solve in Houston

Control board failure from tropical storm surge. Houston’s named storms — Harvey, Nicholas, and the smaller events that flood the Ship Channel corridor — regularly fry Ghost Controls GW-SC-1 and GW-DC-1 boards with moisture infiltration and electrical surge. We replace with OEM boards and upgrade grounding where the original installation cut corners.
Solar battery drain on TSS1 and TSS2 openers. Houston’s frequent overcast days, especially during spring storm season, don’t give solar panels enough consistent charge. We diagnose whether the panel, battery, or charging circuit is at fault — and we carry replacement batteries sized for Houston’s light conditions.
Gear stripping from clay soil heave. When Houston’s gumbo clay swells in wet seasons and shrinks in drought, gate posts tilt and throw the TSS series slide openers out of alignment. The motor keeps running; the gears take the punishment. We reset posts and realign tracks before installing new gearboxes, or the same failure repeats in six months.
Rust-induced limit switch failure on HBS swing gates. Gulf Coast humidity above 80% and salt air from Galveston Bay accelerate corrosion on swing gate hardware. Ghost Controls limit switches seize, causing the gate to slam or stop mid-cycle. We clean, treat, and replace — and we apply rust inhibitors that hold up in Houston’s heat index above 105°F.
HOA violation risks from finish mismatch. In Cinco Ranch, Shadow Creek Ranch, and similar communities, architectural review boards enforce specific ornamental iron profiles and powder-coat colors. We source matching panels and custom-fabricate when needed, keeping your repair compliant.

Ghost Controls Service in Houston: What Local Conditions Mean for Your Equipment

Houston’s expansive gumbo clay soil is the dominant driver of gate repair calls here — and it’s the reason a Ghost Controls system that runs fine in Dallas or San Antonio will give you trouble here. The clay swells dramatically during wet seasons, absorbing water like a sponge, then shrinks and cracks during drought, pulling concrete footings with it. We’ve reset posts in Cinco Ranch that had tilted three inches in a single wet spring, throwing the TSS2 slide gate so far out of plumb that the chain was grinding against the track housing. In stable-soil cities, post resetting is a rarity. In Houston, it’s seasonal maintenance. That clay heave also explains why we see more stripped gears and burned-out Ghost Controls motors here: the opener keeps trying to pull a gate that’s physically bound by a tilted post, and the torque overload destroys the mechanical drive. We don’t just swap the motor. We find out why it failed.

Ghost Controls Models & Products We Service in Houston

We work on the full Ghost Controls residential and light-commercial line:

TSS1 and TSS2 — solar single and dual swing gate openers
SSS1 and SSS2 — single and dual slide gate openers
HBS series — heavy-duty swing gate openers
GW-SC-1 and GW-DC-1 — control boards for single and dual gate configurations

For electronics and motors, we use OEM Ghost Controls parts — compatibility is non-negotiable when you’re dealing with proprietary control logic. For brackets, hinges, and hardware, we offer quality aftermarket alternatives that meet or exceed original specs and save you money. We stock replacement boards, motors, and remotes in our Houston-area inventory, so most repairs don’t wait on shipping. Last spring, we repaired a Ghost Controls TSS1 slide gate in the Enclave at Cinco Ranch that had its control board fried by a lightning surge during a thunderstorm. The gate was out of alignment from post heave, so we reset the concrete footing, replaced the board with an OEM unit, and resprayed the rusted track with the HOA-approved powder-coat color. The homeowner avoided a violation letter and the gate operated smoothly.

Ghost Controls Service Pricing in Houston

Most Ghost Controls repairs in Houston fall between $180 and $450, depending on what’s failed and what the local conditions have done to the installation. A simple battery replacement or limit switch adjustment runs toward the lower end. Control board replacement with post realignment after clay soil heave — common here — pushes toward the higher end. Full opener replacement on a heavily rusted or storm-damaged system ranges $800–$1,400 including labor and basic hardware.

Our free estimate includes a full mechanical and electrical diagnostic, a written quote with parts and labor separated, and an honest assessment of whether repair or replacement makes more sense for your situation. We don’t charge trip fees within the Houston metro. Call (855) 301-3214 for an exact quote — estimates are free.

Serving Houston, TX — Our Local Coverage Area

We’re based in the Houston area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs — Ghost Controls Gate Repair in Houston

Can you fix a Ghost Controls gate that is crooked after the clay soil shifted?

Yes — post resetting and gate realignment is one of our most common Houston services. We excavate the footing, re-pour with proper drainage to slow future heave, and realign the Ghost Controls opener so the gears aren’t fighting binding torque. Call (855) 301-3214 to schedule — same-day service is often available.

Will you match the paint color on my Ghost Controls gate to avoid an HOA violation?

Yes. In master-planned communities like Cinco Ranch and Shadow Creek Ranch, we keep a digital library of approved finish specs and source custom powder-coating or wet-matching when needed. We verify the HOA requirement before we start work.

How long does a Ghost Controls gate opener last in Houston’s humidity?

With proper maintenance — rust treatment, seal inspection, and periodic realignment — seven to twelve years is typical here. Without attention to Houston’s moisture and soil conditions, we’ve seen units fail in four. The difference is usually whether someone addressed the rust and heave early.

Do you replace Ghost Controls batteries for solar openers?

Yes, we stock replacement batteries sized for TSS1 and TSS2 solar systems, and we test the charging circuit and panel output to make sure the new battery actually charges. Houston’s overcast pattern means undersized batteries fail faster here than in sunnier markets. Call (855) 301-3214 — we can test your system today.

Can you install a Ghost Controls gate opener on a sloped driveway typical in Bellaire?

Yes — Bellaire’s lot grading often requires modified hinge geometry or a slide gate conversion. We assess the slope, clearances, and Ghost Controls model compatibility on-site, then fabricate any custom brackets needed in our mobile welding setup.

Service Areas Near Houston

We run Ghost Controls service calls throughout the Houston metro and into surrounding communities: Sugar Land, Pearland, The Woodlands, Bellaire, and Cinco Ranch. James Wilson handles the route personally most days — one call covers it, and you’ll get the same technician who diagnosed your gate, not a subcontractor you’ve never met.

Book Your Ghost Controls Service in Houston Today

We’re independent Ghost Controls specialists with 20 years in the field, OEM parts on the truck, and welding capability to fix what other techs walk away from. Same-day service is available across Houston when you call before noon. Call (855) 301-3214 for your free estimate.

Written by James Wilson, Owner at Horizon Gate Repair Service Texas, serving Houston since 2004.