Gate Parts & Welding in Kirby, TX

Fast, Reliable Gate Parts & Welding Across Kirby

Gate parts and welding in Kirby typically runs $180–$650 depending on whether you’re fixing a hinge, resetting a post, or fabricating a custom rail section. Most calls in 78244 get same-day or next-day response because we keep common parts and welding gear on every truck.

Call (855) 301-3214

We’ve been driving out to Kirby from our Houston base for years, and James Wilson knows the rhythm of this area well — the post-WWII neighborhoods off FM 78, the older tract homes near Randolph Air Force Base, the way the Blackland Prairie clay rewrites the rules on what “level” means from March to September. When your gate starts dragging or your latch won’t catch, you don’t want a technician who’s guessing at why. You want someone who’s already seen what Kirby’s soil and weather do to metal and concrete. Call us at (855) 301-3214 for a free estimate.

Our Gate Parts & Welding crew handles everything from hinge swaps on aging chain-link gates to full post replacement with reinforced footings built for clay movement. If you’re in Windcrest, Converse, or right here in Kirby proper, we’ll come prepared.

Why Horizon Gate Repair Service Texas Is Kirby’s Preferred Gate Parts & Welding Company

James Wilson has handled gate repairs personally for 20 years, and that matters in Kirby more than most places. This isn’t a market where you can swap a hinge and hope for the best — the clay soils here punish shortcuts. Our 638 verified reviews averaging 4.8 stars include plenty from Bexar County homeowners who found us after another company “fixed” the same post twice in one year.

We stock parts and weld on-site, which means fewer return trips. For Kirby residents near Fireside Drive or along the old FM 78 corridor, that translates to gates that actually stay fixed. We’re typically on-site in Kirby within 24 hours, often same-day for posts that have gone fully out of plumb and left a gate inoperable.

We service your brand — whether that’s a Linear opener on a 1970s wrought-iron gate or a Ghost Controls arm struggling with humidity swelling. Nine major brands, one call covers it. No referrals to outside fabricators, no waiting on parts shipments from San Antonio.

Our Gate Parts & Welding Services in Kirby

Hinge Replacement

Kirby’s summer heat above 100°F causes metal hinges to expand and bind against their pins, while winter contraction loosens them again. On a 1960s chain-link gate that’s already been stressed by decades of clay movement, this cycle wears hinge barrels oval and cracks weld points. We replace with heavy-duty ball-bearing or greaseable hinges sized for the gate’s actual weight — not the original spec from when the gate was new and straight. A typical hinge replacement in Kirby runs $180–$280 for a residential walk gate, $320–$450 for a double driveway gate.

Post Replacement

This is where Kirby’s Blackland Prairie clay makes post replacement fundamentally different work than in sandy-soil cities. A post that looks plumb can shift two inches by late August as the clay desiccates and shrinks. We dig deeper than standard spec — 36 to 42 inches for residential posts — and use a flared concrete footing that resists vertical heave. On Fireside Drive, we serviced a 1960s setup where the original concrete footing had heaved nearly 2 inches during a drought-to-rain cycle, causing the LiftMaster opener to jam. We set new posts in a deep, reinforced footing with a wider base to resist clay movement. Post replacement in Kirby typically costs $380–$650 including footing, with steel posts running higher than standard Schedule 40.

Rail Repair

Sagging top rails are epidemic on Kirby’s original chain-link gates — the 1950s through 1970s stock that came with these homes used lighter-gauge steel than modern equivalents. We can splice damaged sections, add tension wire for support, or fabricate replacement rail from heavier stock. For wrought-iron gates near Randolph AFB, we address the rust that forms at welded joints during humid spells, cutting out compromised metal and welding in fresh stock rather than patching over rot. Rail repair in Kirby runs $220–$420 depending on length and whether we’re matching existing ornamental work.

Custom Welding

Our mobile welding rig lets us fabricate brackets, repair cracked frames, and extend gate height right on your property — no hauling to a shop, no two-week wait. In Kirby, we regularly weld custom post caps with integrated hinge mounts that eliminate the bolt-through weakness point, and we fabricate adjustable latch plates that compensate for seasonal post movement. Custom welding starts around $280 for simple bracket fabrication and runs to $550+ for structural frame repairs with material matching.

Trusted Brands We Service in Kirby

We carry parts and have direct troubleshooting experience with Linear, Viking, and Ghost Controls openers — three brands we see frequently on Kirby’s older gates that have been retrofitted with modern operators. Linear’s actuator arms handle clay-soil misalignment better than some competitors when properly shimmed, Viking’s commercial-grade hinges hold up to our heat cycles, and Ghost Controls’ low-voltage systems are popular on residential walk gates near the 78244 core. We stock replacement arms, control boards, and safety sensors for all three, which means Kirby customers aren’t waiting on FedEx while their gate sits open.

Common Gate Parts & Welding Problems We See in Kirby Homes

• Original chain-link gates exceeding service life. The 1950s–1970s stock that dominates Kirby’s housing was built to 20–30 year specs. Sixty years later, the frames are fatigued, the mesh is stretched, and no hinge replacement fully addresses the fundamental sag. We assess whether strategic welding and parts replacement buys another decade, or if the frame itself is too far gone.
• Concrete footings with hidden anchorage failure. This is the Kirby-specific failure that catches homeowners off guard. The post looks solid, the concrete collar above grade is intact, but the footing has rotated or heaved loose from years of clay swell. We probe with a steel rod and check plumb with a 4-foot level — if the post moves independently of the surrounding soil, the footing has lost purchase.
• Metal binding from heat expansion and humidity rust. Summer temperatures above 100°F cause steel gate frames to lengthen slightly, tightening clearances at hinges and latches. Meanwhile, humidity during wet seasons promotes surface rust that flakes into bearing surfaces. The combination means a gate that worked in May drags and sticks by July.
• Misdiagnosed opener problems. We regularly find Ghost Controls and Linear openers that have been replaced unnecessarily — the real issue was a post that shifted out of plumb, causing the gate to bind and overload the operator. A new opener on a crooked gate fails in months. We check the mechanics first, then the electronics.

Pricing for Gate Parts & Welding in Kirby, TX

We Also Serve Cities Near Kirby

We run regular routes through Windcrest, Converse, Live Oak, and Universal City — the same clay-soil conditions extend across this corridor, and we carry the same parts inventory and welding capability to all four. If you’re near the boundary between Kirby and one of these neighbors, we’ll confirm coverage when you call.

FAQs — Gate Parts & Welding in Kirby