Fast, Reliable Gate Parts & Welding Across Irving
Gate parts and welding repair in Irving typically runs $180–$650 depending on whether you’re dealing with a fatigued hinge on a 1960s ranch gate in South Irving or a full control-board retrofit on a Las Colinas HOA slide gate. James Wilson handles these calls personally, and we usually reach Irving properties within 45 minutes from our dispatch point. We’ve spent two decades learning how this city’s split personality—aging wrought-iron ranch gates on shifting black clay versus dense planned communities with 1990s automated operators—creates repair scenarios you won’t find in Dallas or Plano. Call (855) 301-3214 for a free estimate; we stock parts and weld on-site.
Why Horizon Gate Repair Service Texas Is Irving’s Preferred Gate Parts & Welding Company
Our Gate Parts & Welding team knows Irving’s ground before we ever pull up. James Wilson has personally repaired gates in Las Colinas, South Irving, and West Irving for 20 years, and that matters when your 1998 Viking Access operator throws a code no current manual recognizes. We’ve earned 638 verified customer reviews averaging 4.8 stars, and a significant share of those come from Irving HOA managers and homeowners who needed someone who could actually source or fabricate the part rather than declare the whole system obsolete.
Response time to Irving averages under an hour because we route directly from our Houston base through the DFW corridor without subcontracting to unknown technicians. You get James Wilson or no one. We carry BFT, Linear, and Ghost Controls components in our service vehicle, plus a portable MIG welder for structural repairs that can’t wait for a fabrication shop. In Irving’s 75062 and 75063 ZIP codes, that means one visit instead of three.
We understand the local approval dance too. Las Colinas HOAs often require pre-authorized repair specs and matching brick-pillar aesthetics. We’ve worked with enough Irving property managers to know which communities need documentation before we touch a gate operator, and we provide it without being asked twice.
Our Gate Parts & Welding Services in Irving
Hinge Replacement
Steel hinges on wrought-iron gates in South Irving’s 75060 ZIP code fatigue-crack at the weld line after four decades of carrying gate weight. The black clay beneath doesn’t help—seasonal swelling twists posts out of plumb, and the hinge takes the torque. We remove the gate, cut off the cracked hinge, and weld a new heavy-duty barrel hinge or custom-fabricated strap hinge matched to the original ironwork. Typical hinge replacement in Irving runs $180–$320 per gate, including re-plumbing the post if soil movement has shifted it.
Post Replacement
Gate posts in Irving fail two ways: the concrete footing cracks from clay expansion, or the steel post itself rusts through at the soil line. In West Irving’s 1950s ranch neighborhoods, we’ve pulled posts that were original to the Eisenhower administration. We excavate to 36 inches minimum, pour a new concrete footing with rebar reinforcement, and set a galvanized or powder-coated post sized to your gate’s weight and wind load. Post replacement in Irving generally costs $450–$850 depending on gate size and whether we need to relocate the operator mount. We weld new post caps, hinge plates, and latch receivers on-site so everything aligns clean.
Rail Repair & Custom Welding
Irving’s older wrought-iron gates develop rail sag, picket separation, and scrollwork breaks that demand more than a hardware-store bracket. We bring a portable MIG unit to every Irving call and fabricate replacement rails, weld broken scrolls, and reinforce weak points with steel angle or channel. Custom welding in Irving starts around $280 for simple rail repair and runs to $650 for extensive gate frame reconstruction. We match existing profiles where possible and can replicate ornamental details from photographs when the original pattern is no longer manufactured.
Gate Rollers, Latch & Lock Hardware
Las Colinas slide gates rely on V-groove or cantilever rollers that seize after years of grit and moisture exposure. We stock replacement rollers for most track systems and can machine custom axles when the original bracket spacing doesn’t match current production. For latches and locks, Irving’s climate means corrosion—especially on coastal-import hardware that wasn’t spec’d for North Texas humidity. We install marine-grade stainless latches, magnetic locks for automated systems, and mechanical deadbolts for manual gates. Roller and latch service in Irving typically falls between $150–$380.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We service your brand—literally. James Wilson is certified-familiar with nine major manufacturers, and in Irving we see heavy concentrations of Viking Access and Linear/OSCO legacy systems in Las Colinas, plus newer BFT and Ghost Controls installations in updated communities. We stock BFT control boards and Linear actuator parts for same-day resolution, and we carry Ghost Controls solar-compatible components for Irving properties running off-grid entry systems. When a 1990s Viking Access board is discontinued with no OEM substitute, we design retrofits using FAAC or LiftMaster control platforms that communicate with existing gate motors and safety loops. That brand fluency means almost no Irving gate system requires a referral elsewhere.
Common Gate Parts & Welding Problems We See in Irving Homes
- Soil-heaved posts in South and West Irving. The expansive black clay beneath ZIPs 75060–75062 swells in spring rains and shrinks in August heat, cracking concrete footings and tilting gate posts until the gate drags or won’t latch. We re-plumb posts and pour reinforced footings that account for seasonal movement.
- Fatigue-cracked hinges on 40-year wrought-iron gates. Original steel hinges in Irving’s ranch neighborhoods carry decades of load cycles. The weld line between hinge barrel and mounting plate is the failure point; we cut, grind, and weld replacements that outlast the originals.
- Obsolete Viking Access and Linear/OSCO control boards in Las Colinas. HOA community gates installed during the 1990s boom now face discontinued electronics. We recently serviced a Las Colinas homeowner’s association off O’Connor Road where a 1998 Viking Access hydraulic slide gate had lost all power to the control board. The original PC board had been discontinued for years, so we designed a retrofit using a FAAC 740 control board, rewired the entire operator, and installed a new LiftMaster backup battery—saving the HOA $3,000 compared to a full gate replacement.
- Rusted track brackets on 1950s tilt-up gates in West Irving. ZIP 75061 still holds original one-piece doors with hardware no supplier stocks. We fabricate replacement brackets and weld new track angles to keep these systems operational when replacement would mean reframing the entire opening.
Pricing for Gate Parts & Welding in Irving, TX
| Service | Typical Range in Irving |
|---|---|
| Hinge replacement (per gate) | $180 – $320 |
| Post replacement with concrete footing | $450 – $850 |
| Custom welding / rail repair | $280 – $650 |
| Gate roller replacement | $150 – $380 |
| Latch / lock hardware replacement | $120 – $290 |
| Legacy operator control-board retrofit | $680 – $1,400 |
What moves you within these ranges? Gate size and weight, material type (wrought iron versus aluminum versus steel), whether the post footing has failed, and whether we’re matching obsolete hardware or installing current production. Las Colinas HOA gates with commercial-grade operators sit at the higher end; single-family ranch gates in South Irving usually fall lower. We diagnose before we quote—estimates are free, and we explain exactly what we’re seeing before any work starts. Call (855) 301-3214 for your exact number.
We Also Serve Cities Near Irving
Our service radius extends naturally to Farmers Branch, University Park, Highland Park, and Dallas—cities that share Irving’s clay-soil challenges and aging gate stock, though each has its own character. Farmers Branch has similar 1960s ranch-gate density; University Park and Highland Park run to estate-scale automated systems with custom ironwork; Dallas sprawls across every era and style. Wherever you are in the corridor, James Wilson brings the same stocked vehicle and hands-on expertise.
Serving Irving, TX — Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Irving
Irving sits on North Texas’s most aggressive expansive black clay, which swells during wet springs and shrinks during 100°F summers in a constant heave-and-settle cycle. This soil movement cracks concrete footings and tilts posts out of plumb far more often than in cities built on stable sandy or loam soils. We account for this by pouring reinforced footings with deeper embedment and using adjustable hinge setups where possible. Call (855) 301-3214 if your gate is dragging or your latch won’t meet the strike plate—we’ll assess whether it’s a hinge issue or a post issue.
OEM parts for 1990s Viking Access and early Linear/OSCO operators are discontinued with no factory support. We design retrofits using modern FAAC or LiftMaster control boards that interface with existing hydraulic or electromechanical gate motors, preserving the mechanical infrastructure while replacing obsolete electronics. This typically saves 50–70% versus full gate replacement. Call (855) 301-3214 for a retrofit assessment—estimates are free.
Fatigue-cracked steel hinges and rusted latch hardware on original wrought-iron swing gates. These gates have carried load for 40–70 years, and the black clay’s seasonal movement accelerates wear at the hinge weld line. We cut off failed hinges, weld replacements matched to the gate profile, and install modern stainless-steel latches where the originals have corroded through. Most South Irving hinge-and-latch jobs run $180–$320. Call (855) 301-3214 to schedule.
Not necessarily. If the gate frame, motor, and safety systems are sound, a control-board retrofit restores full function at roughly one-third the cost of full replacement. We evaluate the mechanical condition first—seized bearings, cracked gearbox housings, or bent drive arms mean replacement makes sense; clean mechanics mean retrofit. James Wilson will show you both options with real numbers. Call (855) 301-3214 for an honest assessment.
Yes. We handle single-family driveway gates in South and West Irving, and we maintain HOA community entry systems throughout Las Colinas and other planned developments. HOA work requires documentation, spec compliance, and coordination with property managers—we’ve done enough of it in Irving to know the workflow. Residential or community, James Wilson arrives with parts and welding capability ready. Call (855) 301-3214 to discuss your property type.
Ready to fix your Irving gate? James Wilson will take your call personally, diagnose the issue, and arrive with the parts and welding equipment to resolve it—usually same day. Whether you’re managing a Las Colinas HOA entry system with a dead 1990s control board or a South Irving ranch gate with hinges that finally gave out after four decades, we handle it without sending you elsewhere. Call (855) 301-3214 now for your free estimate.
Written by James Wilson, Owner at Horizon Gate Repair Service Texas, serving Irving and the greater DFW area since 2004.